Using The Remote Control And Basic Functions - Sony TRINITRON KV-20M42 Service Manual

Connecting a Camcorder
Using A/V cables, connect AUDIO and VIDEO OUT on your camcorder
to AUDIO and VIDEO IN on your TV.
(Front A/V Panel)
For model KV-13M42, this connection can be made to the A/V input located
on the rear of the TV.
Connecting Your TV
A/V output
7

Using the Remote Control and Basic Functions

Using the Remote Control and
Basic Functions
This section shows you how to use more advanced buttons on the remote
control and how to use the on-screen menus.
Turns the TV off automatically in approximately 30, 60 or 90
minutes. Cancel by pressing until SLEEP OFF appears.
Instantly turns off the sound. Press again or press
sound.
Cycles through the available video inputs.
Press once to show current time, (if set) and channel number.
Press again to activate CAPTION VISION settings, if available. To
cancel, press again until DISPLAY OFF appears.
Cycles through the Multi-Channel TV Sound (MTS) options:
STEREO, SAP (Second Audio Programming) and MONO,
(KV-20S42, 20S43 only).
- Press for channel selection, the channel will change after 2
-
seconds.
Press after selecting a channel using the
immediately activate selection.
Alternates back and forth between the last two channels selected
-
with the - buttons.
Displays the on-screen menu. Press again to exit the menu at any
time.
Activates highlighted selections in the on-screen menu.
Moves the cursor in the on-screen menu.
Press to restore factory settings while in the on-screen menu.
Buttons shown are for remote control RM-Y155, your remote control
may not look exactly like the one illustrated.
to restore
-
- buttons to
9