JVC DX-T9 Service Manual page 33

3.2.11 Removing the side (L) and tray switch board
(See Figs.20 to 22)
• Remove the tray assemblies.
(1) From the topside of the DVD changer mechanism assem-
bly, remove the two screws M attaching the side (L). (See
Fig.20.)
(2) From the left side of the DVD changer mechanism assem-
bly, disconnect the connector
from the motor board and detach the side (L) in an upward
direction. (See Fig.21.)
(3) Remove the screw N attaching the tray switch board to the
side (L). (See Fig.22.)
(4) Release the joint tab y of the side (L) in the direction of the
arrow 1 and release the joint tab z while removing the tray
switch board in the direction of the arrow 2. (See Fig.22.)
CN3 on the tray switch board
SIde(L)
DVD changer mechanism assembly
Fig.20
M
Motor board
Side(L)
Fig.21
Side(L)
Tray switch board
Fig.22
M
M
M
CN3
Tray switch board
y
1
2
z
N
(No.MB368)1-33