JVC DX-T9 Service Manual page 22

3.1.17 Removing the cassette A mechanism assembly
(See Fig.24)
• Remove the metal cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
four screws W and screw X attaching the cassette A mech-
anism assembly.
(2) Disconnect the card wires from the connectors (CN46,
CN47) on the cassette A mechanism assembly
(3) Take out the cassette A mechanism assembly from the
front panel assembly.
Reference:
Remove the trans shield as required.
3.1.18 Removing the cassette B mechanism assembly
(See Fig.25)
• Remove the metal cover and front panel assembly.
(1) From the inside of the front panel assembly, remove the
four screws W and screw X attaching the cassette B mech-
anism assembly.
(2) Take out the cassette B mechanism assembly from the
front panel assembly.
(3) Disconnect the card wires from the connectors (CN33,
CN34) on the cassette B mechanism assembly
Reference:
Remove the trans shield as required.
1-22 (No.MB368)
Cassette A mechanism assembly
W
X
CN47
W
Front panel assembly
Fig.24
Front panel assembly
CN34
W
X
W
Cassette B mechanism assembly
Fig.25
W
CN46
W
Trans shield
CN33
W
W
Trans shield