Adaptive Intelligent Recovery; Compressor Protection; Built-In Compressor Protection - Honeywell PRO TH4210D Installation Manual

PRO TH4210D Programmable Thermostat

Adaptive Intelligent Recovery

Adaptive Intelligent Recovery eliminates guesswork when setting your schedule. It
allows the thermostat to "learn" how long your furnace and air conditioner take to
reach the temperature you want.
Just set your program schedule to the time you want the house to reach your
desired temperature.The thermostat then turns on the heating or cooling at just the
right time to reach your scheduled temperature at your scheduled time.
For example: Set the Wake time to 6 am, and the temperature to 70°.The heat will
come on before 6 am, so the temperature is 70° by the time you wake at 6.
Built-in compressor protection (Setup Function 15)
Inside
75
°
6:30
Wake
Wed
Message flashes until safe
restart time has elapsed
This feature helps prevent damage to the
compressor.
Set To
75
°
Damage can occur if the compressor is re-
started too soon after shutdown.This feature
AM
forces the compressor to wait for a few min-
utes before restarting.
Cool
On
During the wait time, the message Cool On
or Heat On will flash on the display.When
the safe wait time has elapsed, the message
stops flashing and the compressor turns on.
™ (Setup Function 13)
9