Wiring - Honeywell T8411R Installation Instructions Manual

T8411R ELECTRONIC HEAT PUMP THERMOSTAT
NO
WALL
MOUNTING
SCREWS (2)
Fig. 2. Mounting wallplate to wall.

Wiring

IMPORTANT
Use 18-gauge thermostat cable for proper wiring.
All wiring must comply with local electrical codes and
ordinances.
69-1037
NO
Fig. 1. Typical location of thermostat.
WALL
ANCHORS (2)
WALLPLATE
M12202
YES
NO
5 FEET
[1.5 METERS]
CAUTION
Disconnect the power supply to prevent electrical
shock or equipment damage.
The shape of the terminals permits insertion of straight or
wraparound wiring connections; either method is acceptable.
See Fig. 3.
TERMINAL
SCREW
G
C
R
W1
Y
Fig. 3. Wiring connections.
2
M11338
FOR STRAIGHT INSERTION
STRIP 5/16 IN. (8 MM)
FOR WRAPAROUND
STRIP 7/16 IN. (11 MM)
L
W2
E
B
O
M11334