Troubleshooting (Continued)
Problem
Energy savings
temperature pro-
gram 12 hours off.
Rooms do not
2
warm up at pro-
grammed time.
Temperature
change occurs
at the wrong time.
Room
temperatures
are not correct.
Check
— other.
— program dial for proper day
or night phase.
— timer program for heating
system. May need more time
to warm up rooms.
— program pins for correct time
locations.
— positions of thermostat set
point levers.
— position of subbase system
switch (heating-cooling model).
Action
Contact a qualified service technician
for assistance.
Turn clock ahead 12 hours. Move
minute hand clockwise
Move red pin one-half hour earlier
on the program dial.
Relocate pins to desired settings.
Reset to desired temperatures.
Move to desired operating position.
Refer to page 8.
16
only.
(Continued)