Toshiba teli BU030 Instruction Manual

Toshiba teli BU030 Instruction Manual

Bu series b/w camera,color camera
Hide thumbs Also See for BU030:

Advertisement

BU Series

CCD Camera

Instruction Manual

Model
B/W Camera
Color Camera
Thank you for purchasing our product.
Before using this CCD camera, please read through this instruction manual
carefully in order to use this product correctly and safely.
After reading, keep this instruction manual handy so that you can refer to,
whenever you need it.
Information contained in this document is subject to change without prior notice.
Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
: BU030 / BU031 / BU080 / BU130
: BU030C / BU030CF / BU130C / BU130CF
D4213050G
www.toshiba-teli.co.jp

Advertisement

Table of Contents
loading

Summary of Contents for Toshiba teli BU030

  • Page 1: Ccd Camera

    CCD Camera Instruction Manual Model B/W Camera : BU030 / BU031 / BU080 / BU130 Color Camera : BU030C / BU030CF / BU130C / BU130CF Thank you for purchasing our product. Before using this CCD camera, please read through this instruction manual carefully in order to use this product correctly and safely.
  • Page 2: Table Of Contents

    EventControl ..........................67 FrameSynchronization ......................70 LEDIndicatorLuminance ......................71 Appendix ........................72 MultiFrame and Bulk function difference .................. 72 Warranty rules ......................75 Repair .......................... 76 1 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 3: Safety Precautions

    The content of prohibition is shown by a picture or words beside the symbol. This sign indicates MANDATORY ACTION (You are required to do). MANDATORY The content of action is shown by a picture or words beside the symbol. 2 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 4: General Handing

     Do not be handled roughly, damaged, fabricated, bent forcefully, pulled, twisted, bundled, placed under heavy objects or heated the power cable and the connection cable. Avoid Otherwise, fire or electric shock may result. 3 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 5 (every approx five years). Accumulation of dust inside the equipment may result in fire or electric shock. For inspection and cleaning costs, contact your sales representative. Instruction 4 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 6: Cases For Indemnity (Limited Warranty)

    ● The item that is not described in specifications of this product is out of the guarantee. ● The case of damages or losses which are caused by incorrect connection of the cable is out of the guarantee. 5 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 7: Restriction For Use

    (*2): Equipment relating to maintenance of public services/functions involving factors of safety refers to. - Traffic control systems for air transportation, railways, roads, or marine transportation - Equipment for nuclear power generation - Equipment related to the above 6 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 8: Notes On Using This Product

    Avoid intense light such as spot lights on part of the screen because it may cause blooming or smears. If intense light falls on the screen, vertical stripes may appear on the screen, but this is not a malfunction. 7 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 9 Never use alcohol, benzene, thinner, or other chemicals because such chemicals may damage or discolor the paint and indications. If the image pickup surface becomes dusty, contaminated, or scratched, consult your sales representative. 8 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 10 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 9 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 11 This information is applicable for People's Republic of China only. リサイクルに関する情報(包装物) 有关再利用的信息(包装物) Information on recycling of wrapping composition 内部緩衝材料・袋 内部缓冲材料·袋 箱/箱子/Box Internal buffer materials・Bag ペーパーボード 纸板 Paper board 10 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 12: Installation

    ● TOSHIBA TELI CORPORATION Top Page http://www.toshiba-teli.co.jp/index.htm ● Service & Support https://www.toshiba-teli.co.jp/cgi/ss/en/service.cgi Please refer to the TeliU3vSDK startup guide, about Operation environment, Installation, and Setup. 11 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 13: Specifications

    Overview This BU series is an integrated-(one-body)-type camera that adopts all pixel data readout inter line CCD. There are BU030 (VGA: 1/3 type), BU031 (VGA: 1/2 type), BU080 (XGA: 1/3 type), and BU130 (SXGA: 1/3 type). Suffix [C] is attached to the color models.
  • Page 14 * Suffix [F] is not shown in the common part of specifications. ● Compact and lightweight This camera is compact and lightweight; it is easy to integrate into industrial equipment. ● EU RoHS & Chinese ROHS 13 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 15 * IIDC2 is a unified standard established by JIIA (Japan Industrial Association). *e-CON (Easy & Economy connector) is a sensor connector that is normalized by the manufacturer of the sensor, FA equipment and connector. 14 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 16: Configuration

    *1: Optional part. Contact your sales representative for details of option units. *2: Commercial items. 15 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 17: Connection

    Please confirm wires’ specifications before use them. Lost packets may occur by an electrical characteristic of the transmission line of USB3.0. (USB3.0 Interface Card, USB3.0 Cable, and USB3.0 HUB). 16 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 18: Connector Pin Assignment

    *Above figure is connector view from insert side. Pin No. Signal Function GPIO(Line2) GPIO Output (*1) GPIO(Line1) GPIO Output Ground TRIG_IN Trigger Input (*1) Contact your sales representative about availability of this function. 17 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 19: Outline Drawing

    Outline Drawing 18 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 20: General Specifications

    Camera body grounding: No conductive between circuit GND and camera body insulation status *1 F1.4, Gain: Maximum (+18dB), video level: 50% *2 at the all pixel readout 19 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 21 No conductive between circuit GND and camera body insulation status *1 with IR-cut filter *2 F1.4, Gain: Maximum (+18dB), video level: 50% *3 at the all pixel readout 20 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 22 Depends on your PC and USB3.0 interface card configurations, images may not be captured properly (e.g. dropping frames). In this case, change frame rate setting lower. 21 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 23: Led Status

    Slow flash orange (ON: 400ms, OFF: 1600ms) Data being transferred Solid Green Error during data transfer Solid Red (Time period: 500ms) Stand-by Super slow flash orange (ON:200ms, OFF: 2800ms) 22 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 24: I/O Specification

    : High active / Low active (initial factory setting: Low active) Signal Source : TIMER0 ACTIVE USER OUTPUT EXPOSURE ACTIVE FRAME ACTIVE FRAME TRANSFER FRAME TRIGGER WAIT ● Circuit diagram - Trigger Input Inside DC3.3V 10kΩ 23 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 25: Timing Specification

    BU130 33.3 33.3 BU030C BU130C 33.3 33.3 * If the value of T2 is not set by the application, it will be the same as T1. 24 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 26 When the interval of the input trigger signal is extremely short, or when the trigger signal is noisy, there is a possibility of causing the malfunction. In this case, please input a proper trigger signal. 25 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 27: Typical Spectral Response

    Typical Spectral Response * The lens characteristics and light source characteristics is not reflected in table. ● BU030 1000 Wave Length [nm] ● BU031 1000 Wave Length [nm] 26 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 28 ● BU080 1000 Wave Length [nm] ● BU130 1000 Wave Length [nm] 27 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 29 ● BU030C Wave Length [nm] ● BU030CF Wave Length [nm] 28 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 30 ● BU130C Wave Length [nm] ● BU130CF Wave Length [nm] 29 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 31: Operating Ambient Conditions

    Please provide sufficient heat radiation depending on your installation. ● EMC Conditions - EMI (Electro-Magnetic Interference): EN61000-6-4 FCC Part 15 Subpart B Class A - EMS (Electro-Magnetic Susceptibility): EN61000-6-2 30 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 32 (Hitachi cable, Ltd.) Connection: e-CON GPIO(Line2) GPIO(Line2) GPIO(Line1) GPIO(Line1) TRIG IN TRIG IN Please confirm the EMC adaptability when it combines with parts other than them. 31 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 33: Functions

    Color matrix correction LUTControl LUTControl LUT control UserSetControl UserSetControl Load / Save user setting EventControl EventControl Event packet control VenderUniqueControl FrameSynchronization Frame synchronization control LEDIndicatorLuminance LED luminance control 32 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 34 ○ ○ EventControl ○ ○ ○ ○ ○ ○ FrameSynchronization ○ ○ ○ ○ ○ ○ LEDIndicatorLuminance Details of each feature are described in following pages. 33 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 35: Bootstrap Registers

    When opening and closing the stream channel, it is required to control StreamEnable plus SDK setups on your application. Please refer to the TeliU3vSDK for details. 34 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 36: Devicecontrol

    DeviceModelName Beginner Returns the model name. DeviceManufacturerInfo Beginner Returns the manufacturer information. DeviceVersion Beginner Returns the device version. DeviceID Beginner Returns the device ID (serial number). 35 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 37: Imageformatcontrol

    Binning function is disabled when the camera is running in Scalable mode. Scalable function is disabled when the camera is running in Binning mode. Binning mode is available only in B/W models. 36 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 38: Scalable

    Sets horizontal offset (in pixels) from the origin to the region of interest. OffsetY Beginner Sets vertical offset (in pixels) from the origin to the region of interest. 37 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 39 White lines may occur in the upper portions of the screen when strong light exists in a wide area during the scalable mode. This is not a malfunction. If white lines occur, adjust the amount of incident light using the lens. 38 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 40: Binning

    Horizontal & Vertical Vertical binning binning Fig. Binning operation (e.g. VGA) ● Registers Register Visibility Access Description BinningHorizontal Beginner Set horizontal binning. BinningVertical Beginner Set vertical binning. 39 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 41 Binning function is disabled when the camera is running in Scalable mode. Scalable function is disabled when the camera is running in Binning mode. Changing “BinningHorizontal”, “BinningVertical” register value is invalid during image stream data output. 40 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 42: Pixelformat

    * initial factory setting ● Note Bayer alignment of color models is dependent on its model. Changing “PixelSize” register value is invalid during image stream data output. 41 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 43: Testpattern

    TestPattern BU series support test pattern data output. Camera provides following Test patterns; Black White GreyA GreyB GreyHorizontalRamp GreyVerticalRamp Fig. Test pattern 42 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 44 All pixel = 255 @Mono8 GreyA All pixel = 170 @Mono8 GreyB All pixel = 85 @Mono8 GreyHorizontalRamp Horizontal Ramp GreyVerticalRamp Vertical Ramp * initial factory setting ● Note 43 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 45: Acquisitioncontrol

    * initial factory setting - Set the number of frames to transfer (In MultiFrame mode) Set the number of frames to transfer to “AcquisitionFrameCount”. Setting value is Integer type. 44 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 46 Depends on your PC or USB3.0 interface card configurations, images may not be captured normally (e.g. frame drops may occur). In this case, change to frame rate setting lower. 45 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 47: Triggercontrol

    Random Trigger Shutter mode Trigger pulse width control SoftwareTrigger -Edge mode:TriggerSequence0 -Bulk mode:TriggerSequence6 “ExposureTime” register control * The camera operation not mentioned above is not guaranteed. 46 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 48 And you can add delay time from trigger edge to exposure start by register setting. Trigger signal TriggerDelay Exposure USB bus Image Fig. Trigger Delay Details of Random Trigger Shutter operation, refer to "Timing" of "Specification". 47 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 49 - Select trigger source Set the following value to “TriggerSource” register. Setting value is Enumeration type. TriggerSource Function Line0 (*) Hardware trigger Software Software trigger * initial factory setting 48 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 50 When executes “TriggerSoftware” register command, software trigger command is generated. Camera starts exposure by receiving software trigger command. ● Note In SoftwareTrigger operation, the delay time from “TriggerSoftware” to exposure is not guaranteed. 49 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 51: Exposuretime

    ExposureTimeMax 16000000 [μs] Register BU030C BU130C ExposureTime (*) 8000 [μs] 33333 [μs] ExposureTimeMin 10 [μs] 30 [μs] ExposureTimeMax 16000000 [μs] * initial factory setting ● Note 50 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 52: Digitaliocontrol

    Returns the status of each Line signal. UserOutputValueAll Beginner Sets the user output value. LineSelector Beginner Selects the Line of I/O connector. LineSource Beginner Selects the source of the output signal. 51 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 53 Each bit corresponds to each Line (bit0=Line0, bit1=Line1). Line1 and Line2 are available. Line0 is dedicated trigger input. UserOutputValueAll Function 0 (*) Low level output High level output * initial factory setting 52 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 54 UserOutput UserOutputValueAll[2] GPIO_OUT (Line2) Line2 LineModeAll LineInverterAll LineSource Fig. GPIO internal circuit diagram ● Note About the details of Timer0Active signal, refer to “TimerControl” of "Functions". 53 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 55: Timercontrol

    TimerDuration Beginner Sets the width of Timer0Active signal. TimerDelay Beginner Sets the delay of Timer0Active signal. TimerTriggerSource Beginner Selects the source of Timer0Active pulse to start. 54 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 56 HardwareTrigger and Software Trigger mode, and not to be responsed at FrameTriggerError. ExposureStart is available in both HardwareTrigger and Software Trigger mode, and not to be responsed at Timer0Active pulse delays TiggerDelay+TimerDelay[us]. FrameTriggerError. 55 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 57: Gain

    Setting the gain value too high increases noises. When you adjust the brightness of the image, I ask you to have final image quality checked with your environment. 56 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 58: Blacklevel

    Set the following value to “BlackLevel” register. Setting value is Float type. BlackLevel Value Minimum -5.00[%] Maximum +25.00[%] * initial factory setting = 0.00[%] ● Note 57 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 59: Gamma

    - Set Gamma correction Set the following value to “Gamma” register. Setting value is Float type. Gamma Value Minimum 0.45 Maximum (*) 1.00 * initial factory setting ● Note 58 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 60: Balanceratio

    Setting value is Enumeration type. BalanceRatioSelector Function None (*) None of component is selected. BalanceRatio = Red Gain Blue BalanceRatio = Blue Gain * initial factory setting 59 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 61 Too high white balance gain increases noises. After adjusting the white balance of the image, I ask you to have final image quality checked with your environment. 60 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 62: Balancewhiteauto

    Execute auto white balance once. * initial factory setting ● Note BalanceRatio and BalanceWhiteAuto controls are available in following PixelForamt modes. RGB8, YUV411_8, YUV422_8, Bayer*8, Bayer*10 61 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 63: Colorcorrectionmatrix

    Selects a row element of color correction matrix. ColorCorrectionMatrixSelectorJ Beginner Selects a column element of color correction matrix. ColorCorrectionMatrix Beginner Sets a coefficient of color correction matrix. 62 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 64 1.0 and read out data is always 1.0. ColorCorrectionMatrix Value Minimum -1.0 Maximum +0.99 * initial factory setting = 0.0 ● Note ColorCorrectionMatrix control is available in following PixelForamt modes. RGB8, YUV411_8, YUV422_8 63 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 65: Lutcontrol

    “LUTIndex” register value is input level of LUT, and “LUTValue” register value is output level of LUT. LUTIndex / LUTValue setting value Minimum (*) Maximum 1023 * initial factory setting ● Note 64 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 66: Usersetcontrol

    FrameSynchronization VendorUniqueControl AcquisitionFrameRateControl LEDIndicatorLuminance AcquisitionFrameRate AcquisitionControl AcquisitionFrameIntervalControl AcquisitionFrameInterval TriggerMode TriggerSequence TriggerControl TriggerSource TriggerAdditionalParameter TriggerDelay ExposureTimeControl ExposureControl ExposureTime DigitalIOControl LineInverterAll UserOutputValueAll LineSelector LineSource TimerTriggerSource CounterAndTimerControl TimerDuration TimerDelay 65 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 67 * initial factory setting ● Note “UserSetDefault” register value is stored to non-volatile memory when “UserSetSave” is executed. Thus, “UserSetSelector” shall be set other than “Default” in advance. 66 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 68: Eventcontrol

    : End of transferring streaming data. (6) ExposureStart : Start of Exposure. (7) ExposureEnd : End of Exposure. (8) Timer0Start : Start of Timer0. (9) Timer0End : End of Timer0. 67 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 69 Returns the timestamp at the time of Event. EventTimer0StartData EventTimer0StartTimestamp Expert Returns the timestamp at the time of Event. EventTimer0EndData EventTimer0EndTimestamp Expert Returns the timestamp at the time of Event. 68 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 70 Set the following value to “EventNotification” register. The setting value is Enumeration type. setting value Event notification Off (*) Inactive Active * initial factory setting ● Note 69 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 71: Framesynchronization

    Set the following value to “FrameSynchronization” register. Setting value is Enumeration type. setting value function Internal synchronization Bus (*) Bus synchronization * initial factory setting ● Note 70 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 72: Ledindicatorluminance

    - Set LED indicator luminance Set the following value to “LEDIndicatorLuminance” register. Setting value is Float type. LEDIndicatorLuminance Value Minimum 0.00(%) Maximum (*) 100.00(%) * initial factory setting ● Note 71 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 73: Appendix

    Frame 3 Frame 4 Frame 1 This exposure is *Exposure overlaps sensor readout. discarded. Stream USB Bus stops Frame 1 Frame 2 Frame 3 Frame 1 AcquisitionFrameCount 72 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 74 Frame 1 TriggerAdditionalParameter *Exposure overlaps sensor readout. *Exposure time is determined by ExposureTime setting. Stream USB Bus stops Frame 1 Frame 2 Frame 3 Frame 1 73 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 75 This exposure is discarded. TriggerAdditionalParameter *Exposure overlaps sensor readout. *Exposure time is determined by ExposureTime setting. Stream USB Bus stops Frame 1 Frame 2 Frame 1 AcquisitionFrameCount 74 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 76: Warranty Rules

    9. Forgery product, products which does not have proper serial number, products of which serial number is forged, damaged or deleted 10. All defects that happened after the expiration for a warranty term 75 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 77: Repair

    10. The immunity from responsibility of the product is applied in the repair completion products. * Please refer for the inquiry about the software to our homepage or sales personnel. 76 / 76 D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.
  • Page 78 □ It certainly occurs. □ It sometimes occurs. □ It occurs, after time passes. ( □ Others ) <For dealer use> Reception date : Receipt No. : JOB No. : Check : D4213050G www.toshiba-teli.co.jp Copyright © 2013 TOSHIBA TELI CORPORATION, All rights reserved.

This manual is also suitable for:

Bu080Bu130Bu030cBu030cfBu031Bu130c ... Show all

Table of Contents