STEP 10. OPERATING YOUR THERMOSTAT
Change Temperature Setting Until the Next Program Period (Temporary Change)
until the screen shows the desired temperature setting.
The temporary temperature setting is displayed for about 3 seconds and then the room temperature is dis-
played. Temporary appears in the display. The setting cancels when the next program period starts or when
Change Temperature Setting Indefinitely (Hold)
until "Heat" or "Cool" is displayed.
temperature to room temperature after approximately three seconds).
To cancel "Hold" press
Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)
until the display shows the desired temperature setpoint.
If the Vacation Hold needs to be cancelled before the designated time, press
Daylight Savings Time Key
This feature allows you to switch between standard time and daylight savings time.
during fall to set the time back one hour.
to change your setting if desired. (The display changes from showing the setpoint
until the desired number of days that you will be away (1 through 255) is displayed.
to select the program period when you want the program to restart.
to return to the