Copy a Day
Your thermostat can copy program settings from one day to another.
Leave
Press
Wake
,
Press
Day
until the display shows the day you want to copy.
Copy
Press
. The display shows.
Press
Day
until the display shows the day you want to copy to.
Copy
Press
to accept the change.
Repeat these steps for each day you want to copy.
NOTE:
donE appears for two seconds and then the normal program display appears.
Clear a Program Period
NOTE:
Wake cannot be cleared.
Leave
Return
Press
,
Press
Day
until the desired day displays.
Press and hold the
Repeat the above steps for each period to be cleared.
Run
Press
.
Program
69-1285—2
,
Return
or
Sleep
to enter programming mode.
Sleep
, or
for the program period you want to clear.
Leave
,
Return
, or
Sleep
for approximately 3 seconds until the time and temperature clear.
16
Mon
M13327
Mon
Wed
M13328
M13329