Download  Print this page

Step 8. Set The Clock; Step 9. Programming - Honeywell CT3650 Owner's Manual

Seven day programmable heat and/or cool low voltage (20 to 30 vac) thermostat and wallplate
Hide thumbs

Advertisement

Factory Set Function (Feature Number 37)
Do not change this setting.

STEP 8. SET THE CLOCK

Set Current Day and Time
NOTE:
On initial power-up, the screen flashes 1:00 pm until you press a key.
Set Current
Press
.
Day/Time
Press
until screen shows current day.
Day
Press Time
hour increments).
Daylight
Press
until "DST" displays if daylight savings time is in effect.
Time
Run
Press
.
Program

STEP 9. PROGRAMMING

The keyboard is located behind the thermostat cover. The three most frequently used keys are near the display.
Pressing
displays the current temperature settings. Pressing the
thermostat displays day, time, program period, temperature, system and fan settings.
There is an individual key for each of the four program periods:
—The program period when you want the house at a comfortable temperature when you get up and while you
Wake
get ready for work or school. (This is a higher temperature during the heating season and a lower
temperature during the cooling season).
—The program period you can set for an energy-saving temperature while you are away at work or school.
Leave
(This is a lower temperature during the heating season and a higher temperature during the cooling
season).
or
until screen shows current time. (Tapping the
and
13
Set Current
will advance the time in one
Day/Time
keys change the temperature. The
M13346
69-1285—2

Advertisement

loading

  Related Manuals for Honeywell CT3650