Download  Print this page

Honeywell CT3600 Owner's Manual page 16

Seven day programmable heat and/or cool low voltage (20 to 30 vac) thermostat and wallplate
Hide thumbs

Advertisement

NOTE:
Program times are in 15 minute intervals. For example, 8:00, 8:15, 8:30.
Press
or
until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
Heat/Cool
Press
to switch between setpoints.
Settings
NOTE:
Program times are the same for heating and cooling.
Press
or
until the display shows the desired temperature setpoint.
Press
,
Leave
Return
programmed.
Repeat each step in Program the First Day for the rest of the week.
NOTE:
After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
Run
Press
when the entire week is programmed.
Program
Copy a Day
Your thermostat can copy program settings from one day to another.
Press
,
Wake
Leave
Press
until the display shows the day you want to copy.
Day
Press
. The display shows.
Copy
69-1642
or
and repeat these steps for each program period. The First Day is now
Sleep
,
or
to enter programming mode.
Sleep
Return
16
Mon
M13327

Hide quick links:

Advertisement

loading

  Also See for Honeywell CT3600

  Related Manuals for Honeywell CT3600

This manual is also suitable for:

Ct3697