Download  Print this page

Honeywell CT3550 Owner's Manual page 15

Weekday, saturday and sunday programmable heat and/or cool low voltage (20 to 30 vac) thermostat and wallplate
Hide thumbs

Advertisement

Press
or
until the desired wake temperature displays.
The setpoint temperature range is 40°F to 90°F (4.5°C to 32°C) for heating and 45°F to 99°F (7°C to 37°C) for cooling.
Heat/Cool
Press
to switch between setpoints.
Settings
NOTE:
Program times are the same for heating and cooling.
Press
or
until the display shows the desired temperature setpoint.
Fan
Press
until the fan is at the desired setting (On or Auto).
NOTE:
Setting Fan to On runs the system fan continuously in the program periods.
Leave
Return
Press
,
Program Saturday and Sunday
Repeat each step in Program Weekdays for Saturday and Sunday.
Run
Press
when the entire week is programmed.
Program
Clear a Program Period
NOTE:
Wake cannot be cleared.
Leave
Return
Press
,
Day
Press
until the desired day displays (Mon-Fri Sat; Sun).
Press and hold the
Repeat the above steps for each period to be cleared.
Run
Press
.
Program
Sleep
or
and repeat these steps for each time period. Your weekday is now programmed.
Sleep
, or
for the program period you want to clear.
Leave
Return
Sleep
,
, or
for approximately 3 seconds until the time and temperature clear.
15
69-1284—2

Advertisement

loading

  Related Manuals for Honeywell CT3550