STEP 11. OPERATING YOUR THERMOSTAT
Change Temperature Setting Until the Next Program Period (Temporary Change)
q
Press
or
until the screen shows the desired temperature setting.
NOTE:
The temporary temperature setting is displayed for about 3 seconds and then the room temperature is
displayed. Temporary appears in the display. The setting cancels when the next program period starts or
when you press
Change Temperature Setting Indefinitely (Hold)
q
Move the System switch to the desired position (Heat or Cool).
q
Press
then
Hold Temp
temperature to room temperature after approximately three seconds).
q
To cancel "Hold" press
Change the Temperature Setting Until a Designated Day and Period (Vacation Hold)
q
Press
twice.
Hold Temp
q
Press
or
until the display shows the desired temperature setpoint.
q
Press Time
q
Press
,
Wake
Leave
NOTE:
If the Vacation Hold needs to be cancelled before the designated time, press
program.
Run
.
Program
or
to change your setting if desired. (The display changes from showing the setpoint
Run
.
Program
until the desired number of days that you will be away (1 through 255) is displayed.
,
or
to select the program period when you want the program to restart.
Return
Sleep
17
Run
to return to the
Program
69-1199—4