Table of Contents
Advertisement
CHAPTER 1
C. PCL PRINT MENU Options
The PCL PKINT MENU contains the most commonly used options. You can override or change
all options in this menu through your software application. The changes you make through the
operator panel become the permanent default settings.
I'RlNT
MENU
FX%Ory
option
default
COPIES
I
FNT SRC
IN?'
FNT
0
NUMBEK
PITCH
10.00
I-1'. SIZE
12.00
l-20
Description
Selects the number of copies [from 1 to 99) you want to print.
Selects the font source. You can select:
Internal fonts
INT:
CART:
Cartridges
Permanent soft font
SOFl?:
You see the CART option only if a cartridge is installed, and you see
the SO@T option only if permanent salt fonts are downloaded.
If you do not know the font source and font number, you can print a
Font List. The letter you specify here must match the alpha portion
of the Font # on the Font List. For more information about printing
this list. see the Printing the Font List section.
Identifies the Font Number (0 through 999) as listed on the Font
List. Make sure you use the Font # not the Font ID.
If you have installed a font cartridge with a default mark, the
default-marked font overrides the factory default font. The cartridge
default font appears in the PCL PRINT MENU until you selecl a
different deCault through the operator panel or your software
application, you remove the cartridge. or insert a different cartridge
when the default number is 0. The symbol set for the PCL PRINT
MENU is not changed by the marked cartridge.
Selects pitch sizes from 0.44 to 99.99 characters per inch (cpi) in
scroll increments of 0.01. [Hold down the arrow key to increment
rapidly.) You can select a pitch if the font indicated by FNT SRC and
FNT NUMBER is a scalable typeface with fixed spacing. The LBP-
860 adjusts the height (point size) of the characters according to the
pitch you select.
Selects the point size from 4.00 to 999.75 points in 0.25.point
increments. The scroll increment is 0.25 or 1.00 (if you hold down
the arrow key). You can select the point size if the font indicated by
FNT SRC and FNT NUMBER is a scalable font with proportional
spacing.
Point size is a measure of the vertical height of a character in l/72
of an inch. The LBP-860 adjusts the character's horizontal spacing
according to the point size you select.
Advertisement
Table of Contents
