Table of Contents
Advertisement
CHAPTER 1
.TEST/FONT key
You use the TEST/FONT key to print the Self Test or the Font List.
When lhe printer is off-line, press the TEST/FONT key once to start the Self Test. Press and
hold the TEST/FONT key to print the Font List. The Self Test and Font List are described later
in this chapter.
*CONTINUE key
You use the CONTINUE key to allow the printer to resume printing after it was placed off-line
by an operational condition. Most operational conditions are identified by a message, such as
PRINT OVERRUN. Before you continue printing, you need to press CONTINUE to clear the
message and se1 the printer back on-line.
The CONTINUE key sets the printer on-line just like the ON LINE key, but you can also use it
in the following ways:
You can press CONTINUE to override the paper or envelope size selecttons regardless of the
media loaded in the multi-purpose tray, lhe optional Envelope Feeder, or a paper cassette.
This means you could use it to print a letter-size page on legal-size paper if legal-size paper
is loaded in the multi-purpose tray
You ran press CONTINUE to override a request to manually feeder paper or an envelope.
When you do this. the printer selects paper from the next available source.
Menu Keys
You use the menu ke.vs to access the various menus and select the available menu items. This
section briefly describes each key. See the Operator Panel Menus section for information about
accessing and selecting menu items.
4XENU key
The MENlJ key cycles through the PCI, PRINT MENU and the PCL CONFIG MENU.
The printer must be off-line when you press the MENU key.
You use the and keys to step through all available choices for a particular menu item. For
example. after you access the ME'T SIZE option from the PCL PRINT MENU, you press to
display the LEXTER, LEGAL, EXEC, A4, COMIO, MONARC. DL, B5. and C5 choices.
You can use the key to display the choices in reverse order. Lf you hold down either arrow key,
the system scrolls rapidly through all choices for the menu option.
.ENTER key
You use the ENTER key to save a selection in the printer' s permanent memory. An asterisk [*I
appears next to the selection in the menu display window indicating it is the current default
selection. This default selection remains in effect even when you turn off or reset the printer.
If you press ENTER when buffered or temporary data is present, the system only marks the
selections with an asterisk. When you press ON LINE or MENU, the system displays the RESET
TO SAVE message. At this point, you have three choices:
Press RESET to clear the page buffers, remove temporary data, and return all items to their
n
permanent default setlings.
Press ON LINE to place the printer on-line without performing a reset. The selections you
n
1 - 1 6
Advertisement
Table of Contents
