Using The Tp (Traffic Program) Data Service; Ct (Clock Time) Settings - Yamaha PianoCraft MCR-940 Owner's Manual

Receiver/blu-ray disc player
Hide thumbs Also See for PianoCraft MCR-940:
Table of Contents

Advertisement

Using the TP (traffic program) data
service
Use this feature to receive the TP (traffic program) data
service of the Radio Data System station network.
TP indicator
INPUT
TP
TIMER
BASS
PHONES
TP
1
Tune into the desired Radio Data System
broadcasting station.
2
Press TP.
"TP SEARCH" flashes on the front panel display for
about three seconds, and the search starts.
The TP indicator on the receiver flashes during
search.
When the traffic program is received, the TP indicator
stays on and the search stops.
If you press TP, the search starts again.
If the receiver fails to receive the traffic program, the
TP indicator turns off and "NO TP" appears on the
display. The receiver returns to its previous state.
To cancel the search
Press TP during search.
VOLUME
MIN
MAX
TREBLE
BALANCE
PRESET
PURE DIRECT
L
R
RADIO DATA SYSTEM TUNING (EUROPE MODEL ONLY)

CT (clock time) settings

You can use the CT information received from the Radio
Data System stations to adjust the built-in clock of the
receiver.
1
Press OPTION.
An option menu item appears on the front panel
display.
2
Press
/
to select "AUTO CLOCK", and
press ENTER.
3
Press
/
to select "ON" or "OFF", and
press ENTER.
The "AUTO CLOCK" status is displayed.
The default setting is "ON".
ON: Automatically adjusts the receiver clock using
the CT information.
OFF: Does not adjust the receiver clock.
To exit the option menu
Press OPTION.
Note
Changing the "AUTO CLOCK" setting also changes "AUTO
CLOCK" on the DAB (☞p.29). You cannot set "AUTO CLOCK"
on the RDS and DAB separately.
33
En

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

R-840Bd-940Ns-bp300

Table of Contents