Hands-Free/Hand-Held Scanning; Aiming; Beeper/Led Indications - Motorola DS9208 Quick Start Manual

DS9208
Hands-Free Scanning
OPTIMUM ARM POSITION
BEEPER INDICATIONS
Standard Use
Low/medium/high beep
Power up
Parameter Menu Scanning
High/low/high/low beep
Successful
parameter
setting
DS9208
© 2011 MOTOROLA SOLUTIONS, INC. All rights reserved.
Motorola reserves the right to make changes to any product to improve reliability, function, or design.
Motorola does not assume any product liability arising out of, or in connection with, the application or
use of any product, circuit, or application described herein. No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in which Motorola products
might be used. An implied license exists only for equipment, circuits, and subsystems contained in
Motorola products. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are
trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.
All other trademarks are the property of their respective owners.
This Motorola Product may include Motorola Software, Commercial Third Party Software, and Publicly
Available software. Refer to Product Reference Guide for complete copyright, conditions and disclaimer
information.
Warranty
For the complete Motorola hardware product warranty statement, go to:
http://www.motorola.com/enterprisemobility/warranty.
Service Information
If you have a problem using the equipment, contact your facility's Technical or Systems Support. If there
is a problem with the equipment, they will contact Motorola Solutions Support at:
http://supportcentral.motorola.com.
For the latest version of this guide go to: http://supportcentral.motorola.com.
Waste Electrical and Electronic Equipment (WEEE)
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri dönüştürme için Motorola'ya
iade edilmelidir. Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu adresi ziyaret edin:
Motorola Solutions, Inc.
One Motorola Plaza Holtsville, New York 11742-1300, USA
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo are trademarks
or registered trademarks of Motorola Trademark Holdings, LLC and are used under
license. All other trademarks are the property of their respective owners.
© 2011 Motorola Solutions, Inc. All rights reserved.
72-140088-01 Revision A January 2011
DS9208
Hand-Held Scanning
AVOID EXTREME WRIST ANGLES
Short medium beep 4 long low beeps
Bar code decoded Transmission error
detected; data is
ignored
High/low beep Low/high beep
Correct programming Incorrect
sequence performed programming
sequence or
"Cancel" bar code
scanned
123Scan 2 is an easy-to-use, PC-based software tool that enables rapid and easy customized setup via a bar code or USB
cable. For more information, visit: http://www.motorola.com/123Scan 2 .
REGULATORY INFORMATION
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow
the recommendations below. Consult with your local Health & Safety Manager to
ensure that you are adhering to your company's safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
This guide applies to Model Number DS9208
All Motorola devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Local language translations are available at the following website:
http://supportcentral.motorola.com
Any changes or modifications to Motorola equipment, not expressly approved by
Motorola, could void the user's authority to operate the equipment.
Declared maximum operating temperature: 40
Radio Frequency Interference Requirements
Tested to comply
with FCC Standards
FOR HOME OR OFFICE USE
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements – Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Marking and European Economic Area (EEA)
Statement of Compliance
Motorola hereby declares that this device is in compliance with all the applicable
Directives, 2004/108/EC and 2006/95/EC. A Declaration of Conformity may be
obtained from http://www.motorola.com/doc
EAS
System integrator to ensure final product is compliant with all applicable EU
Directives.
http://www.motorola.com/ds9208
OPTIMUM SCANNING
AVOID EXTREME
WRIST ANGLES
Hand-Held Scanning
Off
Scanner is on
and ready to scan,
or no power to
scanner
Hands-Free (Presentation) Scanning
Off
No power to
scanner
123SCAN 2
C / 104 F
o o
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful

Aiming

AVOID BENDING AND REACHING
Alternate left and right hands Alternate left and right hands
taking breaks and task rotation taking breaks and task rotation
LED INDICATIONS
Green Red
Bar code is Transmission
successfully error
decoded
Green Off Momentarily
Scanner is ready Bar code is
to scan successfully
decoded
Japan (VCCI) - Voluntary Control Council for Interference
Class B ITE
This is a Class B product based on the standard of the Voluntary Control Council
for Interference from Information Technology Equipment (VCCI). If this is used
near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
Korea Warning Statement for Class B ITE
Class User's Guide
Class B This device obtained EMC registration mainly for home use
(Broadcasting (Class B) and may be used in all areas.
Communication
Device for Home Use)
기 종 별
이 기기는 가정용(B급)으로 전자파적합등록을
B급 기기
한 기기로서 주로 가정에서 사용하는 것을 목적
(가정용 방송통신기기)
으로 하며, 모든 지역에서 사용할 수 있습니다.
Power Supply
Use ONLY a LISTED Motorola, Type no. PWRS-14000 (5Vdc, 850mA), direct plug-in
power supply, marked Class 2 or LPS (IEC60950-1, SELV). Use of alternative Power
Supply will invalidate any approvals given to this unit and may be dangerous.
LED Devices
Complies with IEC/EN60825-1:2001 & EN 62471: 2006 and IEC62471: 2008.
Caution - use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous light exposure.
Recommended Usage Guide
0 1 2 3 4 5
AVOID BENDING
AVOID REACHING
recommended recommended
Red
Transmission Error
Local Contact:
B
사용자 안내문