Table of Contents
Advertisement
IMPORTANT
Review the settings to confirm that they match
the system. Press Run Program to exit the
Installer Setup. The thermostat has saved the
Installer Setup changes and initiated a reset in
order to operate using the new settings. Be sure
to set the current day and time immediately.
Setting Current Day and Time
1. Press Set Current Day/Time.
NOTE: On initial powerup or after an extended
power loss, 1:00 pm flashes on the
display until a key is pressed.
Set Current
Time
Set Program
Run
Set Current
Wake
Leave
Day/Time
Program
Day/Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
2. Press Day until the current day is displayed.
NOTE: Sun=Sunday, Mon=Monday,
Tue=Tuesday, Wed=Wednesday,
Thu=Thursday, Fri=Friday, Sat=Saturday.
Time
Set Program
Set Current
Run
Wake
Leave
Program
Day/Time
Day
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
3. Press Time
or Time
displayed.
NOTE: Tapping the Set Current Day/Time
changes the time in one hour increments.
Time
Time
Run
Set Current
Wake
Program
Day/Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
NOTE: If the current time is Daylight Savings
Time, press Daylight Time until DST is
displayed.
Time
Daylight
Run
Set Current
Wake
Leave
Day/Time
Program
Time
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
4. Press Run Program.
Time
Run
Run
Set Current
Wake
Leave
Program
Day/Time
Program
Heat/Cool
Hold Temp
Day
Settings
Daylight
Copy
Time
T8602C CHRONOTHERM
Set Day/Time
PM
Return
Sleep
Mon
System
Fan
Set Day/Time
PM
Return
Sleep
Tue
System
Fan
until the current time is
Set Day/Time
AM
Set Program
Leave
Return
Sleep
Tue
System
Fan
Set Day/Time
AM
Set Program
Return
Sleep
Tue
System
Fan
DST
AM
Set Program
Return
Sleep
Tue
Room
System
Fan
Wake
DST
®
IV DELUXE PROGRAMMABLE THERMOSTATS
INSTALLER SYSTEM TEST
Use the Installer System Test to check the thermostat
operation. Refer to Table 4 for a list of the available
system tests.
To start the system test:
CAUTION
The minimum off time for compressors is
bypassed during the Installer System Test.
Equipment damage can occur if the compressor
is cycled too quickly.
Press and hold the increase
the same time until 10 appears. All segments of the
display will be displayed before the 10 appears. See
Fig. 10 and 11.
Table 4. Tests Available In The Installer System Test.
M14619
T e s t
Number
10-19
30-39
40-49
60 0 to
60 19
M14620
70-79
Wait
Set Program
Recovery
Hold for
Filter
Em Ht
Mon
Tue Wed Thu Fri Sat Sun
Wake Leave Return Sleep
M14621
Fig. 10. Display of all LCD segments.
M14622
System
Fig. 11. Display of test number.
Heat
Fan
Auto
M14623
7
and decrease
System Test Description
Heating equipment can be turned on
and off.
Cooling equipment can be turned on
and off.
Fan equipment can be turned on and off.
Keyboard keys test.
Thermostat information including date
code and software versions are displayed.
Set Day/Time
Temporary Setting
AM
PM
Aux Ht
Days
Repl Batt
Room
Heat
DST
keys at
System
Em Heat
Off
Cool
Auto
Fan
Outdoor
On
Cool
Auto
M14559
M14612
69-1567
Hide quick links:
Advertisement
Table of Contents
