What To Do If; Laser Beam Safety Precaution; Cd Pick-Up Maintenance - Sanyo DC-BM300 Service Manual

Hide thumbs Also See for DC-BM300:
Table of Contents

Advertisement

WHAT TO DO IF

If the operation of the unit or display is not normal,
1. Disconnect the mains lead.
2. Press the "RESET" button (rear of the unit) for at least 30 seconds.
3. Connect the mains lead.
4. Resume the operation.

LASER BEAM SAFETY PRECAUTION

• Pick-up that emits a laser beam is used in this CD player section.
CAUTION :
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE
LASER OUTPUT .......... 0.6 mW Max. (CW)
WAVELENGTH ............. 790 nm

CD PICK-UP MAINTENANCE

About pick-up (Optical lens) Cleaning
Clean a lens with swab of the cotton which moistened it with alcohol, cleaning paper or cleaning disc appointed.
Specified cleaning disc : LC-1 (Part code : 645 026 1961 ..... manufactured by SANYO.)
Show a clean procedure in the following in reference by swab of cotton.
1. Cotton swab is wrapped with Cleaning paper.
2. Add the isopropyl alcohol.
3. Gently move the tip of cotton swab just like a draw a whirlpool from inside to outside on the surface of lens.
- 2 -
AM
LOOP
FM
ANT
EXT. ANT
R
L
IN
VIDEO(AUDIO)
L
R
RESET
AM
LOOP
FM
ANT
EXT. ANT
L
R
IN
VIDEO(AUDIO)
L
R
RESET

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dc-bm300xe

Table of Contents