Setting Temporary Temperatures - Honeywell CHRONOTHERM IV DELUXE T8624D Product Data

4. Repeat steps 2 and 3 for all the periods to be cleared.
5. Press Run Program.

Setting Temporary Temperatures

Changing Temperature Setting Until the Next
Program Period
Press increase or decrease
temperature setpoint is displayed.
NOTE: If or appear under the temperature display, it
means that both the heating and cooling setpoints
are being adjusted. Tapping the key will change both
the heat and cool setpoints by one degree. Press i
after the desired setpoint is reached to check the
setpoints.
Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
NOTE: The temporary temperature setting is displayed for
approximately 3 seconds. The setting is canceled
when the next period starts or when Run Program
is pressed.
Changing Temperature Setting Indefinitely
1. Press Hold Temp.
Time Set Program
Set Current
Run
Wake Leave Return
Hold Temp Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
2. Press increase or decrease
setting, if desired.
Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Heat/Cool
Hold Temp
Day System
Settings
Daylight Copy
Time
3. Press Heat/Cool Settings to change between heat and
cool settings.
Time Set Program
Set Current
Run
Wake Leave Return
Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
4. Press increase or decrease
temperature settings.
Time Set Program
Run Set Current
Wake Leave Return
Program Day/Time
Heat/Cool
Hold Temp Day System
Settings
Daylight
Copy
Time
T8624D CHRONOTHERM
key until the desired
Temporary Setting
Heat
Sleep
Wake
Fan
M10332
Setting
Heat
Sleep
Fan
M10333
key to change the
Setting
Heat
Sleep
Fan
M10334
Setting
Cool
Sleep
Fan
M10336
key to adjust
Setting
Cool
Sleep
Fan
M10336
®
IV DELUXE PROGRAMMABLE THERMOSTAT
NOTE: The display changes from the setpoint to the
room temperature after approximately
3 seconds.
5. Press Run Program to cancel the Hold and to return to
the program.
Changing Temperature Setting Until a Designated
Day and Period
1. Press Hold Temp twice.
Time
Set Current
Run
Hold Temp Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
2. Press Time or Time
days is displayed (1 to 256 days). (Example: 18 = Hold
will override the daily programs for 18 days)
Time
Time
Run Set Current
Wake
Day/Time
Program
Heat/Cool
Hold Temp Day
Settings
Daylight Copy
Time
3. Press Wake, Leave, Return or Sleep to select the
period the program will start. (Example: Return =
thermostat will stop the Hold at the Return period
start time)
Time
Set Current
Run
Return Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
4. Press increase or decrease
temperature setting, if desired. (Example: Heat 54° =
heating equipment will operate when the room
temperature is below 54°F)
Time
Run Set Current
Wake
Program Day/Time
Heat/Cool
Hold Temp Day
Settings
Daylight
Copy
Time
NOTE: When the System is set for Auto, both heat and cool
settings are needed. If the System is set for Heat,
only the Heat setpoint is needed or if Cool is
selected, only the Cool setpoint is needed.
5. Press Heat/Cool Settings to change between heat and
cool settings.
15
Setting
Hold for
Set Program
Heat
Leave Return Sleep
Wake
System Fan
until the desired number of
Hold for
Set Program
Heat
Leave Return Sleep
Wake
System Fan
Hold for
Set Program
Heat
Leave Return Sleep
Return
System Fan
key to adjust the
Hold for
Set Program
Heat
Leave
Return Sleep
Return
System Fan
68-0166—1
M10337
Setting
M10338
Setting
M10339
Setting
M10340