Loading Paper; Loading Paper And Other Print Media - Brother DCP-J552DW Basic User's Manual

2

Loading paper

Loading paper and
other print media
NOTE
To print on Photo (10  15 cm) or Photo L
(89  127 mm) paper, you must use the
photo paper tray. (See Loading photo
paper on page 21.)
Load only one size of paper and one type of
paper in the paper tray at any time.
(For more information about paper size,
weight and thickness, see Choosing the right
print media on page 26.)
a
Pull the paper tray completely out of the
machine.
NOTE
• If the paper support flap (1) is open, close
it, and then close the paper support (2).
• When you load a different paper size in
the tray, you will need to change the paper
size setting in the menu of the machine at
the same time.
(See Paper Size on page 24.)
16
b
Lift the output paper tray cover (1).
2
c
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
Make sure that the triangular marks (3)
on the paper width guides (1) and paper
length guide (2) line up with the marks
for the paper size you are using.
1
2
1
1
3
2
3
2