3-9. HDTV Component System Adjustment
HDTV COMPONENT 1080i/60Hz System adjustment
1) Input 1080i/60Hz Color Bar signal into AV4 as shown on Figure (1)
Color Bar 100% Luma, 75% Chroma
VG828/ASTRO Pattern No.955-OPT 2 No.F
2) Perform automatic adjustment of A/D converter
3) Check that the detection value of R, G, B is in the standard
shown in the right column.
Figure (1) 1080i/60Hz Color Bar 100% Luma, 75% Chroma
3-10. White Balance Adjustment
Adjustment of W/B (With internal white signal)
1) Turn on the main power of XS1.
2) Execute the MID_H8_ServiceControl.xls
3) H8_INIT/SVC_FLAG/RGBD=3.
4) Adjust W/B of warm
Color tone set to warm
H8_INIT/SVC_WB/RRTO/warm/ set to FF
#1 H8_INIT/SVC_WB/GRTO/warm/
#1 H8_INIT/SVC_WB/BRTO/warm/
#2 Sevice command Direct Select/Service data write(to NVM) -> Send
5) Adjust W/B of normal
Color tone set to normal
H8_INIT/SVC_WB/RRTO/normal/ set to FF
#1 H8_INIT/SVC_WB/GRTO/normal/
#1 H8_INIT/SVC_WB/BRTO/normal/
#2 Sevice command Direct Select/Service data write(to NVM) -> Send
6) Adjust W/B of cool
Color tone set to cool
H8_INIT/SVC_WB/RRTO/cool/ set to FF
#1 H8_INIT/SVC_WB/GRTO/cool/
#1 H8_INIT/SVC_WB/BRTO/cool/
#2 Sevice command Direct Select/Service data write(to NVM) -> Send
When BRTO is set to FF and cannot adjust, it adjusts in RRTO.
Notes)