Selecting The Sound Mode - Samsung 3 series User Manual

♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➣
The +,
➣
When "TV Speaker" is set to "Off", you can operate only "Sound Select" (in PIP mode) in Sound
menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.

Selecting the Sound Mode

You can set the sound mode in the tOOLS menu.
When you set to "Dual I-II", the current sound mode is
displayed on the screen.
1. Press the tOOLS button on the remote control.
. Press the ▲ or ▼ button to select "Dual I-II".
. Press the ◄ or ► button to select required option.
. Press the ENtER
Audio Type
Mono
A2
Stereo
Stereo
Dual
Mono
NICAM Stereo
Stereo
Dual
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
- and MUtE buttons do not operate when the "TV Speaker" is set to "Off".
button.
Dual 1/2
MONO
STEREO ↔ MONO
DUAL 1 ↔ DUAL 2
MONO
MONO ↔ STEREO
MONO ↔ DUAL 1
DUAL 2
English - 
Picture Mode
Sound Mode
Sleep timer
SRS tS Xt
Energy Saving
Dual l-ll
Default
Automatic
Move
change
DUAL 1
Automatic
change
DUAL 1
tools
: Standard
: Custom
: Off
: Off
: Off
◄ Mono ►
Adjust Exit