Adjusting The Picture Quality (Bnr, Mnr); (Av Sync); Enjoying Mp3 Audio And Jpeg Images; About Mp3 Audio Tracks And Jpeg Image Files - Sony DVP-NS71HP Service Manual

DVP-NS71HP/NS75H/NS76H
Adjusting the Picture
Quality
(BNR, MNR)
You can adjust the picture quality by "BNR"
(Block Noise Reduction) or "MNR"
(Mosquito Noise Reduction)
Adjusting the BNR
The "BNR" function adjusts the picture
quality by reducing the "block noise" or
mosaic like patterns that appear on your TV
screen.
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
then press ENTER.
The options for "BNR" appear.
OFF
OFF
ON
48
AV SYNC
4
Press c repeatedly to adjust the
delay.
Each time you press C/c, the delay is
adjusted by 10 milliseconds.
5
Press ENTER.
The selected setting takes effect.
To reset the "AV SYNC" setting
Press CLEAR in step 4.
Notes
• This function is not effective if you use the
DIGITAL OUT (OPTICAL or COAXIAL) jack,
and set "DOLBY DIGITAL," "MPEG" or "DTS"
in AUDIO SETUP to "DOLBY DIGITAL,"
"MPEG" or "ON" respectively (page 70).
• This function is not effective if you connect a
Dolby Digital or DTS-compliant device via the
HDMI OUT jack, and set "DOLBY DIGITAL,"
"MPEG" or "DTS" in AUDIO SETUP to
"DOLBY DIGITAL," "MPEG" or "ON"
respectively (page 70).
• For DATA CDs/DATA DVDs, this function
works only for DivX video files.
50
3
Press X/x to select the setting.
• OFF: To cancel the "BNR" effect.
• ON: To turn on the "BNR" effect.
4
Press ENTER.
The disc plays with the setting you
selected.
To cancel the "BNR" setting
Select "OFF" in step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
ENTER
• If the outlines of the images on your screen should
DISPLAY
become blurred, set "BNR" to "OFF."
• Depending on the disc or the scene being played,
there may be no "BNR" effect, or it may be hard
to discern.
Adjusting the MNR
The "MNR" function adjusts the picture
quality by reducing the faint noise appearing
around the outlines of the images.
The noise reduction effects are automatically
adjusted within each setting range according
to the video bit rate and other factors.
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
(BNR),
(MNR), then press ENTER.
The options for "MNR" appear.
DVD VIDEO
DVD VIDEO
OFF
OFF
ON
3
Press X/x to select the setting.
• OFF: To cancel the "MNR" effect.
• ON: To turn on the "MNR" effect.
0ms
4
Press ENTER.
The disc plays with the setting you
selected.
To cancel the "MNR" setting
Select "OFF" in step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
• If the outlines of the images on your screen should
become blurred, set "MNR" to "OFF."
• Depending on the disc or the scene being played,
there may be no "MNR" effect, or it may be hard
to discern.
Enjoying MP3 Audio and JPEG
Images
About MP3 Audio Tracks
and JPEG Image Files
MP3 is audio compression technology that
satisfies the ISO/IEC MPEG regulations.
JPEG is image compression technology.
You can play DATA CDs/DATA DVD that
contain MP3 audio tracks or JPEG image
files.
DATA CDs/DATA DVDs that the
player can play
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) or DATA DVDs (DVD-
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs) recorded in MP3 (MPEG-1 Audio
Layer III) and JPEG format. However, the
discs must be recorded according to ISO 9660
Level 1/ Level 2 or Joliet format and DATA
DVDs of Universal Disk Format (UDF) for
the player to recognize the tracks (or files).
Refer to the instructions supplied with the
CD-R/CD-RW drives and the recording
software (not supplied) for details on the
recording format.
Note
The player may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
MP3 audio track or JPEG image
file that the player can play
The player can play the following tracks and
files:
– MP3 audio tracks with the extension
".MP3."
– JPEG image files with the extension
".JPEG" or ".JPG."
– JPEG image files that conform to the DCF*
image file format.
* "Design rule for Camera File system": Image
standards for digital cameras regulated by JEITA
(Japan Electronics and Information Technology
Industries Association).
1-12
Adjusting the Delay
Between the Picture and
Sound

(AV SYNC)

When the sound does not match the pictures
on the screen, you can adjust the delay
between the picture and sound.
CLEAR
ENTER
DISPLAY
1
Press DISPLAY twice during
playback.
The Control Menu appears.
2
Press X/x to select
(AV
SYNC), then press ENTER.
The following display appears.
STOP
DVD VIDEO
0 ms
SET
3
Press x to select "SET c", then
press ENTER.
The "AV SYNC" adjustment bar
appears.
,continued
49
Notes
• The player will play any data with the extension
".MP3," ".JPG," or ".JPEG," even if they are not
in MP3 or JPEG format. Playing these data may
generate a loud noise which could damage your
speaker system.
• The player does not conform to audio tracks in
mp3PRO format.
• Some JPEG files cannot be played.
• You cannot play MP3 audio tracks/JPEG image
files in DATA CDs/DATA DVDs that contain
DivX video files.
About playback order of albums,
tracks, and files
Albums play in the following order:
◆Structure of disc contents
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
ROOT
Album Track (MP3 audio) or
file (JPEG image)
,continued
51