Table of Contents
Advertisement
Your appliance has been fitted with a
warning system which ensures that the
temperature in the freezer section
cannot rise unnoticed and to avoid
energy being wasted if the door is left
open.
Temperature alarm
An alarm will sound and the
temperature display will flash if the
temperature in the freezer section
becomes warm. The temperature the
appliance is set at determines the
temperature the appliance recognises
as being too warm.
The alarm will sound and the
temperature display will also flash:
– when the freezer is switched on.
– if the freezer section door has been
left open for a while, e.g. in order to
load, re-arrange or take food out of
the freezer.
– when freezing large amounts of food
at once.
– if there has been a lengthy
interruption to the power supply.
Door alarm
The alarm will sound if the refrigerator
section door or the freezer section door
is left open for longer than approx. 60
seconds.
Switching on the alarm system
The alarm system is always active. It
does not have to be switched on
manually.
Switching the alarm off early
Once the set temperature has been
reached in the freezer section, the
alarm switches off and the temperature
display stops flashing and lights up
constantly. However, if the noise
disturbs you, you can turn the alarm off
before this if you wish.
^ Press the alarm button.
The alarm will stop. The temperature
display will continue to flash until the
set temperature has been reached.
The display then stops flashing and
lights up constantly. The alarm
system is now ready should it be
needed again.
Alarm
19
Hide quick links:
Advertisement
Table of Contents
