Set Day And Time - Honeywell CT8611 Installation Manual

SET DAY AND TIME

Restore 24V power to the thermostat. When
power is applied, the display will read 1:00 PM and
indicate the room temperature. It will go off for a few
seconds, then begin to flash on and off. Set the
present day and time.
SET
Press .
PRESENT
DAY/TIME
Press to set the current day. Each press of the
DAY
DAY key advances the display one day.
Press TIME or
AHEAD
BACK
to set the current time.
If the display will not come on:
— check the mounting of the thermostat to the
subbase. If loose or misaligned, remove thermo-
stat and reinstall on the subbase, making sure it
is firmly attached.
— check to see that system power is on.
— check voltage between R and C; it should be 20
to 30 Vac.
12