Internal Hard Disk Drives; Optical Drive; Pci Card; Lan Controller - NEC EXPRESS5800 Configuration Manual

CONFIGURATION GUIDE

4 Internal Hard Disk Drives

Available bays: 8
Product Name / Description
600GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 600GB
900GB 10K Hot Plug 2.5-inch SAS HDD : 1 x 900GB
1.2TB 10K Hot Plug 2.5-inch SAS HDD : 1 x 1.2TB
146.5GB 15K Hot Plug 2.5-inch SAS HDD : 1 x 146.5GB
300GB 15K Hot Plug 2.5-inch SAS HDD : 1 x 300GB
NOTE:

Hard drives must be installed in identical pairs to configure RAID 1.
Required System Disk Capacity
See the table below for minimum required system disk capacity to store whole memory dump data.
It is recommended to install hard drives providing the minimum required system disk capacity to reduce the
time to resynchronize after a hard drive replacement.
Memory Size
Up to 28GB
32GB to 64GB
96GB to 192GB
256GB

5 Optical Drive

Available bays: 1
Product Name / Description
Internal DVD Super Multi Drive : 1 x DVD Super Multi drive, not including writing software

6 PCI Card

6.1 LAN Controller

Category
LAN Controller
NOTE:

For iSCSI (data) connection, only 1000BASE-T ports (Including standard LAN ports) are supported.
NEC Corporation
–
NEC EXPRESS5800/R320d-M4 / Windows Server 2008 R2 model
Required System Disk
Capacity
146.5GB
300GB
600GB
900GB
Product Name / Description
1000BASE-T 2ch board kit : 2 x GbE NIC
Intel® Gigabit ET Dual Port Server Adapter
10GBASE-T 1ch Adapter Kit : 2 x 10GbE NIC
Intel® X540-T1
NOTE:
- Up to one controller per module
- Installation in full height slots only supported on R320d-M4
- FCoE functionality is not supported
Revision 1.0, March 2014
Part Number
N8850-047
N8850-048
N8850-051
N8850-049
N8850-050
Part Number
(Standard)
Part Number
N8804-009
N8804-011
11