Controlsync - NEC MultiSync EA274WMi User Manual

ControlSync

1. Connect the master monitor with a sub monitor via a ControlSync cable (ø 2.5) into ControlSync IN/OUT.
2. Follow the steps of DATA COPY. When the setting of the master monitor is adjusted, it will be copied and sent to the
connected sub monitor(s) automatically.
3. Up to 5 sub monitors can be daisy-chained via ControlSync.
NOTE: Connect the master monitor via ControlSync OUT connector.
The ControlSync icon will appear on the upper left of the OSD menu in the sub monitor.
Do not connect IN-IN or OUT-OUT.
Do not make "loop" connection.
Once the monitors are connected, turn the master monitor's power button off and on
to check if ControlSync operates correctly.
Master Monitor
IN (Gray)
The following settings can be controlled by ControlSync:
ECO TOOLS
OFF MODE SENSOR SETTING
OFF MODE START TIME
HUMAN SENSOR SETTING
HUMAN SENSOR START TIME
SCREEN
COLOR
TOOLS
Other settings:
Power Control (DC switch)
Ambient Sensor
Human Sensor Result
Audio Mute
NOTE: Only the master monitor's human sensor and ambient sensor are active. Please do not cover these sensors.
Turn the monitor's power off before connecting/disconnecting the ControlSync cable.
Do not use the ControlSync connectors for any purpose other than specifi ed.
* This value is not a directly adjusted output value. This is adjusted relatively.
Sub Monitor 1
OUT (Black)
(Black) (Gray)
ControlSync cable
BRIGHTNESS*
CONTRAST
ECO MODE
AUTO BRIGHTNESS
BLACK LEVEL
OFF MODE SETTING
HUMAN SENSING
DV MODE
AUTO ADJUST
AUTO CONTRAST
LEFT/RIGHT
DOWN/UP
H.SIZE
FINE
INPUT RESOLUTION
H.RESOLUTION
V.RESOLUTION
Color preset
R, G, B, color gain
VOLUME
SOUND INPUT
PBP MODE
Sub Monitor 2
IN OUT
(Black) (Gray)
ControlSync cable
Yes TOOLS
(continuation)
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes MENU TOOLS
No
No
No
No
No
No
No
No ECO INFORMATION
No
Yes
No
Yes
No
No
English-23
ControlSync icon
IN OUT Up to 5 sub monitors
Next monitor
PBP TYPE
VIDEO LEVEL
OVER SCAN
VIDEO DETECT
EXPANSION MODE
RESPONSE IMPROVE
OFF TIMER
POWER SAVE TIMER
LED BRIGHTNESS
DDC/CI
FACTORY PRESET
LANGUAGE
OSD TURN OFF
OSD LOCK OUT
HOT KEY
SIGNAL INFORMATION
SENSOR INFORMATION
KEY GUIDE
CUSTOMIZE SETTING
CARBON SAVINGS
COST
CARBON CONVERT SETTING
CURRENCY SETTING
CURRENCY CONVERT
SETTING
No
No
No
No
Yes
No
Yes
No
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes