Download Print this page

Specifications; Fcc Statement - Honeywell TE211W User Manual

Atomic clock with wireless indoor/outdoor thermometer
Hide thumbs

Advertisement

SPECIFICATIONS

Temperature Measurement
Main unit
Indoor Temperature
Proposed operating range
Temperature resolution
Remote Sensor
Proposed operating range
with alkaline batteries
Proposed operating range
with lithium batteries
Temperature resolution
RF Transmission Frequency
Maximum number of Remote sensors
RF Transmission Range
Temperature sampling cycle
Calendar and Clock
12/24 hour display in hh : mm format
Date Format: Month – Day format
Day of week: User- selectable in 5 languages
(English, Spanish, French, German, Italian)
Dual 4-minute crescendo alarm with snooze
Pre-alarm for ice alert with programmable intervals of
15, 30, 45, 60 and 90 minutes
Blue Backlight
Power
Main unit: 2 AA batteries (not included)
Remote Sensor: 2 AA batteries (not included)
Dimensions
Main unit: 3.54(L) x 4.92(H) x 1.89(D) inches
Remote sensor: 2.38(L) x 4(H) x 1 (D) inch
13

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
: -5.0°C to +50.0°C /
(2) This device must accept any interference received,
23.0°F to 158.0°F
: 0.1°C/ 0.2°F
Warning: Changes or modification to this unit not expressly
approved by the party responsible for compliance could void
the user's authority to operate the equipment.
: -20°C to + 70°C /
-4°F to 158°F
NOTE: This equipment had been tested and found to comply
with the limits for a Class B Digital device, pursuant to
: - 38°F to 158°F
Part 15 of the FCC Rules. These limits are designed to
( -38.8 C° to 70°C)
provide reasonable protection against harmful interference
: 0.1°C/ 0.2°F
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and
: 433 MHz
used in accordance with the instructions, may cause harmful
: 3
interference to radio communications.
: Maximum 100 feet
: approximately
However, there is no guarantee that interference will not
45 seconds
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one
or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment to an outlet on a circuit different
4. Consult the dealer or an experienced radio / TV
including interference that may cause undesired operation.
from that to which the receiver is connected.
technician for help.
14

Advertisement

loading

  Related Manuals for Honeywell TE211W