Table of Contents
Advertisement
Display assembly subcomponents
NOTE:
These procedures are for replacing the display assembly internal components for the HP
215 G1 Notebook PC non-touchscreen models only.
Component
Antenna Kit (includes left and right wireless antenna cables and transceivers)
Display back cover
Display Hinge Kit (includes left and right hinges)
Display panel cable (includes webcamera/microphone module cable)
Screw pad (includes display screws)
Webcamera/microphone module
Before removing the display assembly subcomponents, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the service door (see
6.
Remove the display panel (see
7.
Remove the display assembly (see
Remove the display assembly subcomponents:
1.
If it is necessary to replace the webcamera/microphone module:
a.
Detach the webcamera/microphone module (1) from the display back cover.
Battery on page
33).
Service door on page
Display panel on page
Display assembly on page
Spare part number
744177-001
744178-001
744181-001
744180-001
744184-001
754263-001
34).
42).
46).
Component replacement procedures
49
Advertisement
Table of Contents
