Intensity Levels Per Mode - Philips Sonicare FlexCare Platinum Instructions Manual

EngliSh
10
gum care: Combines Clean mode with
3
an additional minute to gently stimulate and
massage gums to improve gum health.
Your Sonicare comes with the Clean mode activated.
Note: When the toothbrush is switched on, you cannot
toggle between modes.
1 Prior to turning on the Sonicare, press the
mode button to toggle between modes.
, The selected brushing mode illuminates.
, Once a brushing mode has been selected, it
remains active until another brushing mode is
selected.
Note: When the Sonicare is used in clinical studies,
the default 2-minute Clean mode must be selected.
The handle has to be fully charged and the Easy-start
feature must be deactivated.

Intensity levels per mode

- low: 1 LED indicator light
- Medium: 2 LED indicator lights
- high:3 LED indicator lights
Note: to adjust the Intensity setting to the next higher
or lower level, you can press the + button to increase
intensity or the - button to decrease intensity at any
time during the brushing cycle.
Pressure Sensor
A change in vibration (and a slight change in sound)
alerts you when you apply too much pressure while
brushing. See chapter 'Features'.