Philips A02U AA Service Manual page 94

EN 94 8.
8.4.3
Option Bit Definition
Note: This chassis is global. Therefore all available options are
listed below. It depends on the region which options are used
in the set.
Sources
CVI: AV1 CVI source.
Function: Disabled/Enabled AV1 CVI source.
Values: OFF= Disabled, AV1 CVI source is not available. ON=
Enabled, AV1 CVI source is available.
AV3: Side AV source.
Function: Disabled/Enabled side AV source.
Values: OFF= Disabled, side AV source is not available. ON=
Enabled, side AV source is available.
SCT3: SCART 3 input.
Function: Disabled/Enabled SCART3 input.
Values: OFF= Disabled. ON= Enabled.
VGA: 2FH VGA input.
Function: Disabled/Enabled 2FH VGA input.
Values: OFF= Disabled. ON= Enabled.
2CVI: 2FH CVI input.
Function: Disabled/Enabled 2FH CVI input.
Values: OFF= Disabled. ON= Enabled.
HDMI: HDMI input.
Function: Disabled/Enabled HDMI input.
Values: OFF= Disabled. ON= Enabled.
Video
ASPR: Aspect Ratio Setting.
Function: Select between 4 by 3 or 16 by 9 set.
Values: OFF= 4 by 3 set. ON= 16 by 9 set.
VMUT: Video Mute.
Function: Disabled/Enabled video mute (blanking) during
channel change.
Values: OFF= Disabled. ON= Enabled.
EXCF: External Comb Filter.
Function: To determine the availability of 3D comb filter on the
SSB.
Values: OFF= Disabled, the 3D comb filter is not available.
ON= Enabled, the 3D comb filter is available.
DCMU: Dynamic Contrast via Menu.
Function: Disabled/Enabled Dynamic Contrast menu item.
Values: OFF= Disabled, Dynamic Contrast menu item is not
available. ON= Enabled, Dynamic Contrast menu item is
available.
Note: Dynamic Contrast via RC should always work (for all
region).
DNR: Dynamic Noise Reduction.
Function: Disable/Enable (Dynamic) Noise Reduction function.
Values: OFF=Disabled. ON= Enabled.
BBD: Black Bar Detection.
Function: Disable/Enable Black Bar Detection.
Values: OFF=Disabled, Black Bar Detection not available. ON=
Enabled, Black Bar Detection available.
Note: The Auto Screen Fit will not be included in the picture
size loop when BBD is OFF.
ASF: Auto Screen Fit.
Function: Disable/Enable Auto Screen Fit.
Values: OFF=Disabled, Auto Screen Fit is not available. ON=
Enabled, Auto Screen is Fit available.
Note: This option is only applicable to A02E 2003 (EU Basic).
A02U AA Alignments
HDSF: High Definition Screen Fit.
Function: Disabled/Enabled High Definition Screen Fit.
Values: OFF=Disabled, High Definition Screen Fit is not
available. ON= Enabled, High Definition Screen is Fit available.
CZOM: Continuous Zoom.
Function: Disable/Enable Continuous Zoom.
Values: OFF=Disabled. ON= Enabled.
HSHT: Heading Shift.
Function: Disable/Enable Heading Shift.
Values: OFF=Disabled. ON= Enabled.
SSHT: Subtitle Shift.
Function: Disable/Enable Subtitle Shift.
Values: OFF=Disabled. ON= Enabled.
APC: Auto Picture Control (Auto TV).
Function: Disable/Enable Auto picture control.
Values: OFF= Disabled. ON= Enabled.
WSSB: Wide Screen Signaling Bit.
Function: Disable/Enable Wide screen Signaling bit function.
Values: OFF= Disabled. ON= Enabled.
ROTI: Rotation Tilt.
Function: Change the tilt level of picture tube.
Values: OFF= Disabled, menu item ROTATION is not
available. ON= Enabled, menu item ROTATION is available.
DGSC: Digital Scan.
Function: Enable/Disable the Digital Scan in the DIGITAL OPT
menu.
Values: OFF= Disabled, menu item DIG SCAN is not available.
ON= Enabled, menu item DIG SCAN is available.
SCAVM: SCAVEM.
Function: Enable/Disable SCAVEM.
Values: OFF= Disabled. ON= Enabled.
Audio
ISMU: Incredible Surround through Menu.
Function: Disabled/Enabled incredible stereo (through Menu)
function.
Values: OFF= Disabled, menu item INCREDIBLE STEREO
(through Menu) is not available. ON= Enabled, menu item
INCREDIBLE STEREO (through Menu) available.
AAVL: Automatic Volume Level control.
Function: Disable/Enable automatic volume leveler function.
Values: OFF=Disabled, menu item AVL is not available. ON=
Enabled, menu item AVL is available.
SPKC: Speaker Control.
Function: Disabled/Enabled internal speakers.
Values: OFF= Disabled, menu item SPEAKERS is not
available. ON= Enabled, menu item SPEAKERS is available.
Note: SPEAKERS menu item is present in SOUND submenu
when SPKC is ON.
DBYV: Dolby Virtual.
Function: Select surround setting.
Values: OFF= Disabled, DOLBY VIRTUAL setting is not
available. ON= Enabled, DOLBY VIRTUAL setting is available.
Note: Incredible surround & Dolby virtual are mutually
exclusive.
EQTO: Equalizer or Tone control.
Function: Selection between Equalizer and Tone control (Bass
and Treble).
Values: OFF= Tone control (Bass and Treble). ON= Equalizer.
Note: Equalizer and Tone (Bass and treble) control are
mutually exclusive.
BASF: Bass Feature.
Function: Select Dynamic (DBE) and Ultra Bass (DUB).