Advertisement
RH-18/36/38
Disassembly Instructions
Domesheet Exchange
Use SRT-6 to loosen one corner of the Domesheet.
Take a new Domesheet from carrier film. Do not touch
the keydomes from lower side.
Slowly place Engine Module from top side on.
Page 8
Company confidential
Tear off Domesheet in diagonal direction to avoid remains of
glue.
Position Domesheet in direction to the upper right cor-
ner, as close as possible to the shielding edge.
Before sinking the Engine Module, make sure that it is
also close to the same side of the shielding.
Nokia Corporation.
CCS Technical Documentation
Issue 1 10/03
Advertisement
