Honda HS520A Owner's Manual page 26

SERVICING YOUR SNOWTHROWER
Engine Oil Change
Drain the oil while the engine is
still warm to assure rapid and
complete draining.
1. Place the snowthrower on a
level surface.
2. Place a suitable container
below the drain bolt to catch
the used oil, then remove the
oil filler cap/dipstick and the
drain plug.
3. Allow the used oil to drain completely, then reinstall the drain plug,
and tighten it securely.
NOTICE
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of used motor oil
properly. Put it in a sealed container and take it to a recycling
center. Do not throw it in the trash; do not pour it on the ground or
down a drain.
4. With the engine in a level position, fill to the outer edge of the oil
filler hole with the recommended oil (page 25).
OIL CAPACITY: 0.63 US quart (20.3 fl oz, 0.6 liter)
NOTICE
Running the engine with a low oil level can cause engine damage.
5. Screw in the oil filler cap/dipstick securely.
24
DRAIN PLUG &
WASHER