HCD-BC150/BC250
2-12. TRAY
2 two screws
(+BTP 2.6 × 8)
1 two screws
3 bracket
(+BTP 2.6 × 8)
5 tray
4
2-13. MOTOR BOARD, M761 (LD/ST MOTOR), M762 (BU U/D MOTOR)
1 screw
(+BTP 2.6 × 8)
3 screw
(+BTP 2.6 × 8)
2 bracket
4 MOTOR board
5 Remove soldering from the two points.
7 Remove soldering from the two points.
6 M761 (LD/ST MOTOR)
8 M762 (BU U/D MOTOR)
13