Trouble Shooting; 7-1.Before Svc Checking; 7-2.Test Mode; 7-3.How To Know The Water Level Frequency - LG WD-8050F Service Manual

7. TROUBLE SHOOTING

7-1.BEFORE SVC CHECKING

¡ÆBe careful of electric shock while trouble shooting.
¡ÆDisconnect power plug from the outlet before service.

7-2.TEST MODE.

¡ÆIf you press ¡a Power¡b button with both ¡a Rinse¡b and ¡a Spin¡b buttons pressed the machine can be gotten into the test
mode.
¡ÆTo check if functions operate well, press ¡a Start/Pause¡b button in test mode as follows.
NOTE :
Even if you press the button to check inlet valve, inlet valve does not operate until the drum
comes to a complete stop from spinning.
Times of press
None
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times

7-3.HOW TO KNOW THE WATER LEVEL FREQUENCY

ƒRPress the £ Wash£ and £ Rinse£ buttons simultaneously.
ex) 641 : Water level frequency = 241¡¿10
Water is added.
Checking Point
All lamps turn on
Counterclockwise spin
Low speed Spin
High speed Spin
Inlet valve for pre-wash operation
Inlet valve for main-wash operation
Inlet valve for main-wash operation
Clockwise spin
The Heater is in operation for 3 sec.
Draining pump operation
Auto off operation
The last two digits means water level frequency(10
If water is added in operation, number Ô6Õ will appear.
3~6 (Drum rpm ¡ 10)
55~65 (Drum rpm ¡ 10)
95~105 (Drum rpm ¡ 10)
Water level frequency(25~65)
Water level frequency(25~65)
Water level frequency(25~65)
3~6 (Drum rpm¡ 10)
Water Temperature
Water level frequency
-1
§
( ¡fi 2¡fl is ommitted)
-1
13
Display Status
§
)