References; General Specification; Input/Output Characteristics - Yamaha SB168-ES Owner's Manual

References

General Specification
US/Canada: 120V 65W, 60Hz
Korea:
Power Requirements China:
Japan:
Other:
Dimensions 480 x 350 x 132 mm (W x D x H)
Net Weight 8 kg
Operation free-air : ±0 °C to +40 °C
Temperature Range
Storage : -20 °C to +60 °C
AC Cable Length 250 cm
Accessories Owner's Manual, AC Cable

Input/Output Characteristics

● Analog Input Characteristics
Input
GAIN
Terminals
-62 dB
INPUT 1–16
+10 dB
*1. XLR-3-31 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
* In these specifications, when dBu represents a specific voltage, 0 dBu is referenced to 0.775 Vrms.
* AD converters are 24-bit linear, 128-times oversampling.
● Analog Output Characteristics
Output Actual Source
Terminals Impedance
75 Ω
OUTPUT 1–8
*1. XLR-3-32 type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
* In these specifications, when dBu represents a specific voltage, 0 dBu is referenced to 0.775 Vrms.
* DA converters are 24-bit, 128-times oversampling.
● Digital Input/Output Characteristics
Terminal
IN
EtherSound EtherSound
OUT
*1. Use a RJ-45 connector compliant with Neutrik EtherCon®
* Use a CAT5e STP (Shielded Twisted Pair) cable compliant with EtherSound.
* Use electrically conductive tape to securely connect the metal part of the connector with the shielded part of the cable in order to prevent
electromagnetic interference.
* An EtherSound certified cable is recommended. Maximum length available depends on each cable specification.
● Control I/O Characteristics
Terminal Format
NETWORK IEE802.3
* A CAT5e STP (Shielded Twisted Pair) cable is recommended. Maximum length is 100 m.
220V 65W, 60Hz
220V 65W, 50Hz
100V 65W, 50/60Hz
110V–240V 65W, 50/60Hz
Actual Load
For Use With Nominal
Impedance
50–600 Ω Mics &
3 kΩ
600 Ω Lines
For Use With Max. Output Level
Nominal Select SW
+24 dB (default)
600 Ω Lines
+18 dB
Format Data Length
24bit 100 Base-TX
Level Connector
10 Base-T/
RJ-45
100 Base-TX
Input Level
Nominal Max. before clip
-62 dBu
-42 dBu (6.16 mV)
(0.616 mV)
+10 dBu (2.45 V) +30 dBu (24.5 V)
Output Level
Nominal Max. before clip
+4 dBu (1.23 V) +24 dBu (12.3 V)
-2 dBu (616 mV) +18 dBu (6.16 V)
Level Audio Connector
8 ch Input/
RJ-45*
16 ch Output
Connector
XLR-3-31 type
1
(Balanced)*
Connector
XLR-3-32 type
1
(Balanced)*
1
SB168-ES Owner's Manual
167