Honda CR-V 2006 Owner's Manual page 209

Headlight Aiming
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustments should be done by your
dealer or other qualified mechanic.
Replacing a Headlight Bulb
Your vehicle has halogen headlight
bulbs. When replacing a bulb, handle
it by its base, and protect the glass
from contact with your skin or hard
objects. If you touch the glass, clean
it with denatured alcohol and a clean
cloth.
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
WEATHER SEAL BULB
CONNECTOR HOLD-DOWN WIRE
Low Beam Headlight
1. Remove the electrical connector
from the bulb by pulling the
connector straight back.
2. Remove the rubber weather seal
by pulling on the tab.
3. Unclip the end of the hold-down
wire from its slot. Pivot it out of
the way, and remove the bulb.
CONTINUED
Lights
203