Safety Switch - Honda H4013 Owner's Manual

Safety switch
Before performing these inspections, remove the spark plug cap.
1. P.T.O. switch inspection
l
With the shift lever in the N (Neutral) position, set the P.T.O. lever in
the ON (Engaged) position.
l
Check that the starter motor does not operate when the engine
switch is turned to the START position.
l
Return the P.T.O. lever to the OFF (Disengaged) position.
2. Neutral switch inspection
l
With the P.T.O. lever in the OFF (Disengaged) position, set the shift
lever in the MOWING range.
l
Check that the starter motor does not operate when the engine
switch is turned to the START position.
l
Return the shift lever to the N (Neutral) position.
28