Honda 2005 Odyssey Owner's Manual page 192

Main Menu
Table of Contents
Ventilation
The flow-through ventilation system
draws in outside air, circulates it
through the interior, then exhausts it
through vents near the rear side
panels.
1. Set the temperature control dial or
button to the lower limit.
2. Make sure the A/C is off.
3. Select and fresh air mode.
4. Set the fan to the desired speed.
Using the Heater
The heater uses engine coolant to
warm the air. If the engine is cold, it
will be several minutes before you
feel warm air coming from the
system.
1. Select and fresh air mode.
2. Set the fan to the desired speed.
3. Adjust the warmth of the air with
the temperature control dial or
buttons.
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
71 ). If it moves near the red mark,
turn off the A/C until the gauge
reads normally.
1. Press the A/C button. The
indicator in the button comes on
(LX model) or ''A/C ON'' is shown
in the display (EX and Touring
models) when a fan speed is
selected.
2. Make sure the temperature is set
to the lower limit.
3. Select .
4. If the outside air is humid, select
recirculation mode. If the outside
air is dry, select fresh air mode.
5. Set the fan to the desired speed.
Vents, Heating, and A/C
If the interior is very warm,
cool it down more rapidly by partially
opening the windows, turning on the
A/C, and setting the fan to
maximum speed in fresh air mode.
you can
CONTINUED
191