Honda HHT35S Owner's Manual page 20

OPERATION
5. Set the trimmer on the ground, resting on the
debris shield and the fuel tank guard. Do not
allow the cutting-line or blade to contact any
obstruction.
Always rest the trimmer on the ground for
starting, rather than holding it in the operating
position. This prevents the end of the trimmer
from swinging into something as you start the
engine.
6. With your left hand, hold the frame pipe just
ahead of the engine. With your right hand, pull
the starter grip lightly until you feel resistance,
then pull briskly. Return the starter grip gently.
7. If the choke lever was moved to the CLOSED
position to start the engine, gradually move it
to the OPEN position as the engine warms
up.
Allow the engine to warm up for a few minutes
after a cold start. When the engine is warm
enough to idle well, pull and release the
throttle trigger to disengage the throttle set
button.
8. With the engine idling, hook the trimmer to
your shoulder harness. Be careful to avoid
contact with the cutting-line head or blade
while handling the trimmer with the engine
running.
The cutting-line head or blade should not
rotate with the engine idling. If there is rotation
at idle, adjust the idle speed correctly before
using the trimmer. For idle adjustment,
consult your authorized Honda servicing
dealer.
18
CHOKE LEVER
OPEN
QUICK-RELEASE
LATCH
HOOK