Event Setup - D-Link mydlink DNR-322L User Manual

Section 3 - Configuration
Step 1: Select the event below.
Hard Disk When the Overwrite function is not enabled, the
Space Full: NVR will stop recording when the HDD is full.
Step 2: Click Add to set up the actions of the event.
E-mail: If the event occurs, the system will send an E-mail
to the preset contacts.
Step 3: Click the action, and then click Configure to
modify the details of that action if necessary.
Step 4: Repeat step 2 through 3 to add more actions.
D-Link DNR-322L User Manual
Event Setup
45