9 Loosen the ten screws securing the system board, and then slide the
board toward the front, up and out of the system. See Figure 3-27.
Figure 3-27. Removing and Installing the System Board
1
1
screws (10)
Installing the System Board
1 Align the holes A and B on the system board to position the board correctly
in the system.
2 Replace the ten screws to secure the system board in place.
3 Reconnect the power, SATA, and front panel cables to the system board.
See "System Board Connectors" on page 127.
2
2
system board assembly
Installing System Components
105