Lenovo ThinkPad X200 tablet Hardware Maintenance Manual page 60

Table 7. Status indicators (continued)
Indicator
3
Wireless WAN
status
4
Num lock
5
Caps lock
6
Drive in use
7
Power on
8
Battery status
9
AC power status
52
ThinkPad X200 Tablet and X201 Tablet Hardware Maintenance Manual
Meaning
Green: The wireless WAN is on, and the radio link is ready for use, or the
data is being transmitted.
Blinking Data is being transmitted (for some models).
green:
Green: The numeric keypad on the keyboard is enabled. To enable or
disable the keypad, press and hold the Shift key, and press the
NumLk (ScrLk) key.
Green: Caps Lock mode is enabled. To enable or disable Caps Lock
mode, press the Caps Lock key.
Green: Data is being read from or written to the hard disk drive, the
diskette drive, or the drive in the Serial Ultrabay Slim device. When
this indicator is on, do not put the computer into sleep (standby)
mode or turn off the computer.
Note: Do not move the system while the green drive-in-use light is on. Sudden physical
shock could cause drive errors.
Green: The computer is on and ready to use. This indicator stays lit
whenever the computer is on and is not in sleep (standby) mode.
Green: The battery is charged between 80% to 100% of the capacity,
and being discharged between 0% to 80% of the capacity.
Blinking green: The battery is charged between 20% to 80% of the capacity,
and being charged.
Orange: The battery is charged between 5% and 20% of the capacity,
and being discharged.
Blinking orange The battery is charged between 5% to 20% of the capacity,
(slow): and being charged.
Blinking orange The battery is charged between 0% to 5% of the capacity.
(rapid):
Green: The computer is connected to the ac power supply.