Advertisement
CONTENTS
Preparation ......................................................................... 4
Charging the Power Pack's Built-in Battery ................. 4
Selecting the Right Adaptaplug ................................... 6
Using the Power Pack ......................................................... 7
Replacing the Fuse ............................................................. 8
Care .................................................................................... 9
Specifications .................................................................... 10
1
Advertisement
Related Manuals for Radio Shack Universal Rechargeable Ni-MH PowerPack for 3/4.5/6/7.5/9 Volt DC Devices
Summary of Contents for Radio Shack Universal Rechargeable Ni-MH PowerPack for 3/4.5/6/7.5/9 Volt DC Devices
-
Page 1: Table Of Contents
CONTENTS Preparation ................. 4 Charging the Power Pack’s Built-in Battery ....4 Selecting the Right Adaptaplug ........6 Using the Power Pack ............7 Replacing the Fuse ............. 8 Care ..................9 Specifications ..............10... - Page 2 Universal Rechargeable Ni-MH Power Pack for 3/4.5/6/7.5/9 Volt DC Devices OWNER’S MANUAL — Please read before using this equipment. Your RadioShack Universal Rechargeable Ni-MH Power Pack can be used as a portable energy source for low-voltage DC de- vices that have a DC jack such as a digital camera, PDA (Person- al Data Assistant), portable MD/CD/DVD player, and so on.
- Page 3 Full Battery Protection — stops charging automatically prevent- ing overcharging which can damage the built-in battery. Protection includes peak voltage detection, negative Delta V protection, a charging control timer, and a thermal sensor cut-off. Internal Battery Protection — prevents the internal battery being discharged from becoming too low to operate and limits current to prevent draining the battery if a short-circuit occurs.
- Page 4 Your power pack is ETL listed to UL standards and meets all ap- plicable FCC standards. FCC STATEMENT This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause un- desired operation.
-
Page 5: Preparation
IMPORTANT SAFETY INSTRUCTIONS 1. SAVE THESE INSTRUCTIONS. This manual contains impor- tant safety instructions for power pack RadioShack Cat. No. 23-047. 2. Before using the power pack, read all the instructions and cautionary markings in this manual, on the power pack and on the products that you use with the power pack. - Page 6 Warning: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle, or other outlet unless you can fully insert the blades to prevent blade exposure. Using Vehicle Battery Power (12V DC) Caution: Use only the supplied power cord. If your power cord is lost or damaged, you can replace it with Cat.
-
Page 7: Selecting The Right Adaptaplug
Selecting the Right Adaptaplug The Adaptaplug allows you to match the size and polarity of your portable device’s DC input jack. RadioShack stores offer a variety of Adaptaplugs; select the one that fits your portable device. The power pack comes with five Adaptaplugs. The colors and sizes are: Type Color... -
Page 8: Using The Power Pack
Important: Your portable device must be rated 3, 4.5, 6, 7.5 or 9V DC and must require no more than the rated output current of this adapter. The following table shows the maximum current available from this adapter for each output voltage. Output Voltage Maximum Current 2000mA... -
Page 9: Replacing The Fuse
• The power pack has no output when set to CHARGE • To save battery power, always set the power pack to CHARGE when it is not in use. REPLACING THE FUSE If the power pack stops operating when using the cigarette-lighter adapter, follow these steps to replace the 2-amp fuse. -
Page 10: Care
CARE Keep the power pack dry; if it gets wet, wipe it dry immediately. Use and store the power pack only in normal temperature environ- ments. Handle the power pack carefully; do not drop it. Keep the power pack away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new. -
Page 11: Specifications
SPECIFICATIONS Maximum Power Consumption (Input) ..........10W Input Voltage ........ 12V DC or 100–240 V AC, 50 or 60Hz Output Voltage ..........3V, 4.5V Maximum 2000 mA 6V Maximum 1500 mA 7.5V Maximum 1200 mA 9V Maximum 1000 mA Battery Capacity ................ 3650 mAh Full Charging Time .............. - Page 12 NOTES...
- Page 13 Limited Ninety-Day Warranty This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MER- CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CON-...
Need help?
Do you have a question about the Universal Rechargeable Ni-MH PowerPack for 3/4.5/6/7.5/9 Volt DC Devices and is the answer not in the manual?
Questions and answers