Replacing The Heat Sink; Procedure; Postrequisites - Dell Inspiron 3137 Owner's Manual

Replacing the Heat Sink

WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.

Procedure

NOTE: The original thermal grease can be reused, if the original system board
and heat sink are reinstalled together. If either the system board or the heat sink
is replaced, use the thermal pad provided in the kit to make sure that thermal
conductivity is achieved.
1
Align the screws on the heat sink with the screw holes on the system board.
2 Tighten the captive screws that secure the heat sink to the system board.

Postrequisites

1 Replace the battery. See "Replacing the Battery" on page 13.
2
Replace the base cover. See "Replacing the Base Cover" on page 11.
32
| Replacing the Heat Sink