Dell PowerEdge M520 Owner's Manual page 89

Error Code Message Information
Action
HWC5004
Message
Details
Action
HWC5006
Message
Action
HWC5008
Message
Action
HWC5010
Message
Action
HWC5014
Message
Action
HWC5031
Message
Details
Action
HWC5032
Message
Details
Action
HWC5034
Message
Details
Action
HWC5036
Message
Check chassis fabric type in CMC GUI and compare to the type of
IOM or mezzanine card.
A link tuning failure detected on <
CMC has old firmware. After updating the firmware the CMC will
recognize the device.
Update the CMC firmware. If the issue persists, see
name >.
A failure is detected on <
If the issue persists, see Getting
Console is not available for the <
If the issue persists, see Getting
name > cannot detect any hosts.
<
If the issue persists, see Getting
name > is not functional and is powered off.
<
If the issue persists, see Getting
number > is offline.
IO module <
The CMC has powered off the IOM.
If the issue persists, see Getting
A fabric mismatch detected on IO module <
The fabric type for IOM's on the same chassis fabric must match.
Check chassis fabric type in CMC GUI and compare to the type of
both IOM's.
A link tuning failure detected on IO module <
Link tuning table not supported for this IO modular.
Update the CMC firmware. If the issue persists, see
A failure is detected on IO module <
name >.
Getting
Help.
name >.
Help.
Help.
Help.
Help.
number >.
number >.
Getting
number >.
Help.
Help.
89