Dell PowerEdge M520 Owner's Manual page 80

Servers
Hide thumbs Also See for PowerEdge M520:
Table of Contents

Advertisement

Error Code
Message Information
Action
CPU0008
Message
Details
Action
CPU0010
Message
Details
Action
CPU0023
Message
LCD Message
Action
CPU0100
Message
Details
Action
CPU0101
Message
LCD Message
Details
Action
CPU0102
Message
Details
Action
CPU0103
Message
80
1. Turn system off and remove input power for one minute.
Reapply input power and turn system on.
2. Make sure the processor is seated correctly.
3. If the issue persists, see
number > is disabled.
CPU <
System is unable to boot or may run in a degraded state.
If unexpected, check presence, and system setup (BIOS)
configuration.
number > is throttled.
CPU <
The CPU is throttled due to thermal or power conditions.
Review system logs for power or thermal exceptions.
number > is absent.
CPU <
number > is absent. Check CPU.
CPU <
Verify processor installation. If present, re-seat the processor.
number > temperature is less than the lower warning threshold.
CPU <
System performance may be degraded.
Check system operating environment.
number > temperature is less than the lower critical threshold.
CPU <
number > temperature is outside of range.
CPU <
System performance may be degraded.
Check system operating environment, fans, and heat-sinks.
number > temperature is greater than the upper warning
CPU <
threshold.
System performance may be degraded.
Check system operating environment, fans, and heat-sinks.
number > temperature is greater than the upper critical
CPU <
threshold.
Getting
Help.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents