Table of Contents
Advertisement
l
To prepare
for tilling:
Pull the wheel
arm out, pivot the wheel
up and release the arm.
4. Tilling
depth
hen used in the field.
-------When
moved on road.
Tilling
depth
can be adjusted
by
removing
the retainer
and sliding
the
drag
bar
up
or
down
as
aErArNER
necessary.
5. Handling
tips
Adjust
the handlebar
height
to a comfortable
position
(waist
height
for
normal
tilling).
The drag bar should
always
be used when tilling.
It enables
you to com-
pensate
for the hardness
of the soil. The ideal height
of the drag bar will
depend
on the type of soil being tilled and soil conditions
at the time of
tilling.
In general,
however,
the drag bar should
be adjusted
so that the
tiller
is tilted
slightly
backward.
If the
machine
jerks
forward
while
tilling,
press
down
on
the
handlebars.
This will cause the tines to dig more deeply
into the soil.
If tines
dig in but
the
machine
will
not
move
forward,
move
the
handlebars
from side to side.
When turning,
push down
on the handlebars
to bring the tiller's
weight
to the rear; this will make turning
easier.
16
Hide quick links:
Advertisement
Table of Contents
