Overview; Using The Ip Proprietary Telephones On The Local Office Lan - Panasonic Hybrid IP-PBX Manual

1.1 Overview

1.1 Overview
1.1.1 Using the IP Proprietary Telephones on the Local Office
LAN
Panasonic KX-NT series IP proprietary telephones (IP-PTs) allow voice communication over the data
network by converting the voice into data. The following diagram shows a simple Voice over Internet protocol
(VoIP) network using the IP-PTs at the local office.
IP-PT
Extn. 102
Network Parameters
You will need to have the following IP addressing and VLAN ID information to use IP-PTs on your network.
This information is typically supplied by a network administrator.
The numbers in the table below are given as examples. Consult your network administrator for specific
values.
Parameter
IP-PT IP Address
Subnet Mask Address
4 Information about IP Proprietary Telephones
IP-PT
Extn. 101
Switching
Hub
Hybrid IP-PBX
with an IP-EXT16 card
Description
Identifies the location of IP-PTs on the
network. Each IP-PT must have a
unique IP address.
Defines which digits of an IP address
are used for the network address and
the host address at each network
location. IP addresses of IP-PTs and the
IP-EXT card must fall within the same
subnet as that of the default gateway
(e.g., router) of the LAN.
PC
DHCP Server
Example Entry
IP-PT Extn. 101 IP-PT Extn. 102
192.168.0.101 192.168.0.102
255.255.255.0